Guide

Build Class For the SpiderCarts Recluse Go Kart

Build Class For the SpiderCarts Recluse Go Kart

Here is the classic class for building the Recluse Go Kart by Spidercarts. Robert walks you through step by step in building your cart.

  • 1. Tools and Safety

    In this video, we at Spidercarts will walk you through the essential tools and safety equipment you’ll need to build a project involving metalworking, like constructing a go-kart. First, we’ll highlight the importance of safety. Safety glasses are a must when working with metal. As we cut, weld, and grind, there will be flying debris […]

  • 2. Work Surfaces

    n this video, we at Spidercarts emphasize the importance of selecting the right workspace and work surfaces for your project. Since this is a large and potentially messy project, it’s essential to choose a space that can accommodate the work and any mess that may come with it. You’ll be cutting metal and spray painting, […]

  • 3. Metal Choices

    /In this video, we at Spidercarts discuss the types of metal you’ll need to complete the frame for your project. The primary metal used will be 1-inch by 1-inch square tubing, with a 14-gauge thickness. When purchasing this tubing, you’ll need to specify these dimensions at your metal supply store. The tubing typically comes in […]

  • 4. Measuring and Cutting

    In this video, we at Spidercarts walk you through the process of cutting and preparing metal pieces for the go-kart frame. We start by measuring and marking the metal according to the project’s specifications, including a 4-inch length and two 30° angles. After marking the metal, we use a chop saw to make the cuts, […]

  • 5. Drilling

    In this video, we at Spidercarts demonstrate the drilling process for various metal pieces needed to assemble the go-kart. We start by preparing the steering bracket, where we mark the spot for a 5/16-inch hole, use a punch to create a divot, and then drill through the metal, ensuring the piece is clamped securely on […]

  • 6. Welding Back Sub Frame

    In this video, we at Spidercarts walk you through the process of assembling the subframe for the go-kart. First, we explain how to align and mark the pieces, starting with the 2130, which serves as the reference for all other measurements. After marking the center and measuring 6 inches in both directions from the center, […]

  • 7. Welding Front Sub Frame

    In this video, we at Spidercarts walk you through the assembly of the front subframe of the go-kart. First, we focus on the subframe runners, which are the 2730 pieces, and attach them to the 430 pieces at a 30° angle. We ensure the pieces are aligned properly by using a gauge to double-check the […]

  • 8. Final Welds

    In this video, we at Spidercarts guide you through the process of assembling and welding the go-kart’s frame, focusing on key components like the subframe, front bumper, and steering brackets. First, we position and clamp the 2730 pieces that serve as the runners, ensuring that the brackets are correctly aligned at a 25° angle. Once […]

  • 9. Paint

    In this video, we at Spidercarts walk you through the final steps of preparing the go-kart frame for painting. After ensuring all your welds are cleaned up, we recommend using a simple method to clean the frame by wiping it down with a mixture of laundry detergent and hot water. This will remove the greasy […]

  • 10. Front End Assembly

    In this video, we at Spidercarts guide you through the assembly of the go-kart, starting with the front end. After cleaning the welded frame, we prepare it for painting by using a solution of laundry detergent and hot water. Once painted, we move on to drilling necessary holes for the brake and gas pedals, ensuring […]

  • 11. Rear End Assembly

    In this video, we at Spidercarts walk you through assembling the rear axle and drivetrain components of the go-kart. We start by installing the sprocket hub and sprocket assembly on the right side, ensuring the sprocket is positioned closest to the motor. The bearing is then sandwiched between the bearing brackets, with set screws placed […]

  • 12. Final Assembly

    In this video, Spidercarts walks you through the final steps of assembling and customizing your go-kart. After dealing with minor adjustments such as the gas tank hitting the seat, we show how to solve such issues by modifying the bracket and relocating the gas tank. The 6.5 HP motor requires a custom bracket, while the […]